Airborne Tunable Laser Absorption Spectrometer

Status

Status
Retired
Operated By
PI

ATLAS uses a tunable laser to detect an infrared-active target gas such as N2O, methane, carbon monoxide, or ozone. The laser source is tuned to an individual roto-vibrational line in an infrared absorption band of the target gas, and is frequency modulated at 2 kHz. The instrument detects the infrared target gas by measuring the fractional absorption of the infrared beam from the tunable diode laser as it traverses a multipass White cell containing an atmospheric sample at ambient pressure.

Synchronous detection of the resultant amplitude modulation at 2kHz and 4kHz yields the first and second harmonics of the generally weak absorption feature with high sensitivity (DI/I 1E-5). Part of the main beam is split off through a short cell containing a known amount of the target gas to a reference detector. The reference first harmonic signal is used to lock the laser frequency to the absorption line center, while the second harmonic signal is used to derive the calibration factor needed to convert the measurement beam second harmonic amplitude into absolute gas concentration. A zero beam is included to correct for background gas absorption occurring outside the multipass cell. The response time of the instrument is set by the gas flow rate through the White cell, which is normally adjusted to give a new sample every second. Periodic standard additions of the target gas are injected into the sample stream as a second method to calibrate the measurement technique and as an overall instrument diagnostic.

Instrument Type
Measurements
N2O,
CH4,
CO,
Aircraft
Recent Missions
(ER-2 - AFRC)
;
(ER-2 - AFRC)
;
(ER-2 - AFRC)
;
(ER-2 - AFRC)
;
(ER-2 - AFRC)
;
(ER-2 - AFRC)
Point(s) of Contact
(POC; PI),
Range of Measurement
In situ
Measurement Sampling Rate
1.00 Hz
Location
Spear pod, right wing
Notes
Resolution: 1 ppbv.
Accuracy: 10% (2σ) ± 1ppbv (for N2O)