An Observationally Based Global Band-by-Band Surface Emissivity Dataset for...

Huang, X., X. Chen, D. K. Zhou, and Xu Liu (2016), An Observationally Based Global Band-by-Band Surface Emissivity Dataset for Climate and Weather Simulations, J. Atmos. Sci., 73, 3541-3555,

While current atmospheric general circulation models (GCMs) still treat the surface as a blackbody in their longwave radiation scheme, recent studies suggest the need for taking realistic surface spectral emissivity into account. There have been few measurements available for the surface emissivity in the far IR (<650 cm−1). Based on first-principle calculation, the authors compute the spectral emissivity over the entire longwave spectrum for a variety of surface types. MODIS-retrieved mid-IR surface emissivity at 0.05° × 0.05° spatial resolution is then regressed against the calculated spectral emissivity to determine the surface type for each grid. The derived spectral emissivity data are then spatially averaged onto 0.5° × 0.5° grids and spectrally integrated onto the bandwidths used by the RRTMG_LW—a longwave radiation scheme widely used in current climate and numerical weather models. The band-by-band surface emissivity dataset is then compared with retrieved surface spectral emissivities from Infrared Atmospheric Sounding Interferometer (IASI) measurements. The comparison shows favorable agreement between two datasets in all the bands covered by the IASI measurements. The authors further use the dataset in conjunction with ERA-Interim to evaluate its impact on the top-of-atmosphere radiation budget. Depending on the blackbody surface assumptions used in the original calculation, the globally averaged difference caused by the inclusion of realistic surface emissivity ranges from −1.2 to −1.5 W m−2 for clear-sky OLR and from −0.67 to −0.94 W m−2 for all-sky OLR. Moreover, the difference is not spatially uniform and has a distinct spatial pattern.

PDF of Publication: 
Download from publisher's website.