Disclaimer: This material is being kept online for historical purposes. Though accurate at the time of publication, it is no longer being updated. The page may contain broken links or outdated information, and parts may not function in current web browsers. Visit https://espo.nasa.gov for information about our current projects.

 

Stratospheric Aerosol Sampling: Effect of a Blunt-Body Housing on Inlet...

Dhaniyala, S., P. Wennberg, R. C. Flagan, D. Fahey, M. J. Northway, R. Gao, and T. P. Bui (2004), Stratospheric Aerosol Sampling: Effect of a Blunt-Body Housing on Inlet Sampling Characteristics, Aerosol Sci. Tech., 38, 1080-1090, doi:10.1080/02786829088581.
Abstract: 

During a campaign to study ozone loss mechanisms in the Arctic stratosphere (SOLVE), several instruments on NASA's ER·2 aircraft obser ved a very low number density (0.1 I-I) of large, nitric-acid-containing particles that form the polar stratospheric clouds (PSCs). For effective physical and chemical characterization of these particles, the measurements from these instruments have to be intercompared and integrated. In particular, proper interpretation requires knowledge of the sampling characteristics of the particles into the instruments. Here , we present the calculation of the sampling characteristics of the one of the instruments on the ER-2, the NOAA NOy instrument. This instrument sampled ambient particles and gas from two forward-facing inlets located fore and aft on a particle-separation housing (the football ) and measured total NOy in the sample. In recent studies, ambient aero sol mass has been estimated by the difference of the measurements of the two inlets with the assumption that the rear inlet obser vation s represent the gas-ph ase NOy and small particles and the front inlet samples represent gas-ph ase NOy and all particle sizes with varied efficiency (anisokinetic sa mpling). Thi s knowledge was deri ved largely from semiempirical relations and potential flow studies of the housing. In our study, we used CFD simulations to model the compressible flow conditions and considered noncontinuum effects in calculating particle trajectories. Our simulations show that the blunt body housing the inlets has a strong and complex interaction with the flow and particles sampled by the two inlets. The simulations show that the front inlet characteristics are influenced by the effect of the blunt body on the upstream pres sure field. Th e rear inlet sampling characteristics are influenced both by the shape and size of the inlet and its location on the blunt body.The se interaction s result in calculated inlet characteristics that are significantly different from pre viously assum ed values. Analysis of the SOLVE dat a, considering the ambient conditions and the calculated inlet sampling characteristics, in conjunction with thermodynamic growth modeling of super-cooled tern ary solution (STS) particles, provides validation of the CFD results.

PDF of Publication: 
Download from publisher's website.