[Exports_project_office] [Exports_process_ship] Process ship ctd/rosette sensors, and a few other odds and ends

[Emmanuel Boss]

Debbie,
We (UMaine) are providing the UVP for the Ravelle.
Mark Ohman used our UVP on his previous cruise.
Best,
  Emmanuel

On Thu, Apr 12, 2018 at 11:15 AM, Deborah K Steinberg <debbies at vims.edu>
wrote:

> Dear Process ship folks:
>
> Below is the ship’s ctd rosette-related aux sensors I have officially
> requested for Revelle (note - does not pertain to trace metal clean
> rosette).
> If there is anything I am not yet aware of or got something wrong please
> let me know.
>
> Also, does anyone want to request any of the following (most likely
> pertains to sediment trap gang), and if so, how many:
> -air tugger
> -strobes
> -radio detection finder
>
> The ship’s ctd has 8 auxiliary ports (additional to the standard Pressure
> and dual Temperature and Conductivity Sensors). Note that I did not request
> an altimeter- we needed the aux port for other stuff and deemed not
> necessary since we are not casting close to bottom.
>
> Ship-provided AUX sensors/ports requested:
>
> 1) O2 sensor (which we will need to be freshly calibrated for cruise)
>
> 2) Transmissometer
>
> 3) & 4) a combo Fluorometer-Turbidity Sensor (FLNTU with Chl F and
> backscattering; we think SIO probably has- but I am checking)
>
>
>
> PI/Science-provided:
>
> 5) beam c bio-optics sensor (Emmanuel or Dave providing?)
>
> 6) PAR sensor- likely Biospherical Q series- rated to 2000 m. My
> understanding is Craig Lee has one that will be provided to Revelle (Ride
> decided not to use PAR)
>
> 7) *Underwater Vision Profiler (UVP5)-sends data over an AUX channel, but
> has its own internal battery power, so it doesn’t draw current  (Andrew
> providing for Revelle)
>
> 8) *LISST Deep-will also require an AUX channel to power the instrument
> (Andrew providing for Revelle)
>
> *The UVP and LISST will be attached to the ctd rosette frame.  Andrew and
> Emmanuel, SIO will need info from you on mounting configuration. Note that
> Revelle has had a cruise with UVP and LISST sensors mounted and it worked
> OK- Mark Ohman at SIO is PI that did that if you want to contact.
>
>
>
> Dr. Deborah K. Steinberg
> CSX Professor of Marine Science
> Virginia Institute of Marine Science
> +1.804.684.7838 | +1.804.684.7293 fax
> debbies at vims.edu <susan at vims.edu> |  http://www.vims.edu
> PO Box 1346 | Rt. 1208 Greate Rd., Gloucester Pt., VA 23062 USA
>
>
> _______________________________________________
> Exports_process_ship mailing list
> Exports_process_ship at espo.nasa.gov
> https://espo.nasa.gov/lists/listinfo/exports_process_ship
>
>


-- 
************************************************
Emmanuel Boss, Professor
School of Marine Sciences
5706 Aubert Hall, University of Maine
Orono, ME 04469-5706
Tel: 207-581-4378, Cell: 207-745-3061
Fax: 207-581-4388
emmanuel.boss at maine.edu
http://misclab.umeoce.maine.edu/boss/boss.php
skype: emmanuel.boss
************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://espo.nasa.gov/pipermail/exports_project_office/attachments/20180412/1066e3b6/attachment-0001.html>