Extraction of Absolute Water Level Using TanDEM-X Bistatic Observations With a Large Perpendicular Baseline

The application of Wetland synthetic aperture radar interferometry (InSAR) has often been restricted in practical hydrological monitoring because it is based on relative estimates of water level changes between two synthetic aperture radar acquisitions, as opposed to absolute water levels obtained by ground measurements. TanDEM-X bistatic observations can provide absolute water level estimates using simultaneous phase measurements by a two-satellite constellation with TerraSAR-X. We evaluated two datasets of TanDEM-X bistatic observations acquired during an experimental science phase on August 26 and 31, 2015, with a very large baseline configuration to extract absolute water levels of Everglades wetland in southern Florida, USA. The perpendicular baselines are 1.43 and 1.36 km, and the ambiguities of height were calculated as 3.61 and 3.90 m in each interferometric pair, respectively. Hourly water level measurements provided by the Everglades depth estimation network (EDEN) were used to verify the estimated absolute water levels. Several stage stations located in densely vegetated areas that showed incoherence were excluded from the verification as outliers. The verification results show an excellent agreement (degree of determination > 0.95) between the InSAR derived absolute water levels and the stage station measurements. The root mean square error (RMSE) between the TanDEM-X results and stage records was 0.77 and 0.66 m, respectively. Severe volume decorrelations over the vegetated area, owing to the large perpendicular baselines, were detected, despite near zero temporal baseline of the bistatic observations. The absolute water levels can be used as excellent constraints for wetland surface flow models.