Evaluation of aerosol number concentrations from CALIPSO with ATom airborne in...

Choudhury, G., A. Ansmann, and M. Tesche (2022), Evaluation of aerosol number concentrations from CALIPSO with ATom airborne in situ measurements, Atmos. Chem. Phys., 22, 7143-7161, doi:10.5194/acp-22-7143-2022.
Abstract: 

The present study aims to evaluate the available aerosol number concentration (ANC) retrieval algorithms for spaceborne lidar CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) aboard the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) satellite with the airborne in situ measurements from the ATom (Atmospheric Tomography Mission) campaign. We used HYSPLIT (Hybrid SingleParticle Lagrangian Integrated Trajectory model) to match both the measurements in space and identified 53 cases that were suitable for comparison. Since the ATom data include the dry aerosol extinction coefficient, we used kappa parameterization to adjust the ambient measurements from CALIOP to dry conditions. As both the datasets have a different vertical resolution, we regrid them to uniform height bins of 240 m from the surface to a height of 5 km. On comparing the dry extinction coefficients, we found a reasonable agreement between the CALIOP and ATom measurements with Spearman’s correlation coefficient of 0.715. Disagreement was found mostly for retrievals above 3 km altitude. Thus, to compare the ANC, which may vary by orders of magnitude in space and time, we further limit the datasets and only select those height bins for which the CALIOP-derived dry extinction coefficient is within ±50 % of the ATom measurements. This additional filter further increases the probability of comparing the same air parcel. The altitude bins which qualify the extinction coefficient constraint are used to estimate ANC with a dry radius > 50 nm (n50,dry ) and > 250 nm (n250,dry ). The POLIPHON (Polarization Lidar Photometer Networking) and OMCAM (Optical Modelling of CALIPSO Aerosol Microphysics) algorithms were used to estimate the n50,dry and n250,dry . The POLIPHON estimates of n50,dry and n250,dry were found to be in good agreement with the in situ measurements, with a correlation coefficient of 0.829 and 0.47, root mean square error (RMSE) of 234 and 13 cm−3 , and bias of −97 and 4 cm−3 , respectively. The OMCAM estimates of n50,dry and n250,dry were also in reasonable agreement with the in situ measurements, with a correlation coefficient of 0.823 and 0.463, RMSE of 247 and 13 cm−3 , and bias of 44 and 4 cm−3 , respectively. However, we found that the OMCAM-estimated n50,dry were about an order of magnitude less than the in situ measurements for marine-dominated cases. We propose a modification to the OMCAM algorithm by using an AERONET-based marine model. With the updated OMCAM algorithm, the n50,dry agrees well with the ATom measurements. Such concurrence between the satellite-derived ANC and the independent ATom in situ measurements emboldens the use of CALIOP in studying the aerosol–cloud interactions.

PDF of Publication: 
Download from publisher's website.
Research Program: 
Tropospheric Composition Program (TCP)
Mission: 
ATom