Warning message

Member access has been temporarily disabled. Please try again later.
The AVE-Houston2 website is undergoing a major upgrade that began Friday, October 11th at 5:00 PM PDT. The new upgraded site will be available no later than Monday, October 21st. Until that time, the current site will be visible but logins are disabled.

 

Disclaimer: This material is being kept online for historical purposes. Though accurate at the time of publication, it is no longer being updated. The page may contain broken links or outdated information, and parts may not function in current web browsers. Visit https://espo.nasa.gov for information about our current projects.

 

Preflight Spectral Calibration of the Orbiting Carbon Observatory 2

Lee, R. A. M., C. O'Dell, D. Wunch, C. M. Roehl, G. B. Osterman, J. Blavier, R. Rosenberg, L. Chapsky, C. Frankenberg, S. L. Hunyadi-Lay, B. M. Fisher, D. M. Rider, D. Crisp, and R. Pollock (2017), Preflight Spectral Calibration of the Orbiting Carbon Observatory 2, IEEE Trans. Geosci. Remote Sens., 55, 2499-2508, doi:10.1109/TGRS.2016.2645614.
Abstract: 

This paper describes the preflight spectral calibration methods and results for the Orbiting Carbon Observatory 2 (OCO-2), following the approach developed for the first OCO. The instrument line shape (ILS) function and dispersion parameters were determined through laser-based spectroscopic measurements, and then further optimized by comparing solar spectra recorded simultaneously on the ground by the OCO-2 flight instrument and a collocated high-resolution Fourier transform spectrometer (FTS). The resulting ILS profiles and dispersion parameters, when applied to the FTS solar data, showed agreement between the spectra recorded by the spectrometers and FTS to approximately 0.2% RMS, satisfying the preflight spectral calibration accuracy requirement of <0.25% RMS. Specific changes to the OCO-2 instrument and calibration process, compared to the original OCO, include stray-light protection; improved laser setup; increased spectral sampling; enhanced data screening, and incremental improvements in the ILS, dispersion, and FTS optimization analyses.

PDF of Publication: 
Download from publisher's website.